SKIL 3410-02 10-Inch Portable Table Saw Review

SKIL 3410-02 10-Inch Table Saw with Folding Stand Review

When I started to make larger pieces of furniture, I struggled to find a tool that could provide me with most cuts in one tool. This problem was solved by purchasing a table saw. If you are like me and you don’t have a lot of space in your workshop, you may want to consider buying a job site table saw.

Skil 3410-02 is just one out of many options on the market right now. To help you make an informed decision, we have created this Skil 3410-02 review that highlights the versatility of this power tool and features you need to consider.

Table of Contents

SKIL 3410-02 Review

As my grandfather used to tell me, a good power tool should provide you with versatility and allow you to get the job done faster. Table saws offer you solutions to both problems.

To start with, these power tools allow you to make consistent cuts compared to those you can make with circular saws. Setting a fence allows each cut to match the previous one, an important consideration when you are building something like a chest of drawers.

Another important consideration is the types of cuts you can make with a table saw. Not only can you make a cross and rip cut, but you can also make dado, rabbet, and miter cuts with minimal effort. The ability to adjust the fence, miter, and blade on these saws allow you to make multiple cuts without having to depend upon hand tools or multiple setups.

Job site table saws offer advantages over other designs, such as cabinet-styled models. These products provide users with portability. This can be critical if your shop space is limited or you are working in a temporary area such as your garage. They also generate plenty of power, which can be an issue with smaller designs like a benchtop table saw.

You will want to keep the following in mind when purchasing a job site table saw:

  • Space – Make sure there is enough space to set up the saw as well as provide clearance for boards and panels you are cutting
  • Power – A house outlet is required (job site designs do not need 220 volts) as well as a cord properly rated for the saw
  • Accessories – Fences, tracks for a miter gauge, blade guards, and dust collection add versatility

Presenting The Skil 3410-02

SKIL 3410-02 10-Inch Table Saw with Folding Stand
  • 20-Inch x 26-Inch cast aluminum table extends to 20-Inch x 32-Inch for longer work pieces
  • 3-1/2-Inch cut height capacity for cutting through 4x materials
  • Heavy-duty steel stand for fast setup and easy transport. Bevel Angle Range:0° to 47°

OVERVIEW

Unlike designs offered by DeWalt or Bosch, this saw offers similar versatility for a much lower price point. Compared to earlier models, the Skil 3410-02 combines lighter weights with a smoother fence control.

Pros

  • Levers and knobs are conveniently located and easy to operate
  • A silver faceplate with black markings allow measurements to be read easily
  • The rip fence stays in line with the blade and provides straight cuts
  • This product includes a miter gauge as part of the kit
  • A steel frame stand provides height and stability when the table saw is used

Cons

  • The aluminum table will transfer more vibration than cast iron would
  • Connection points on the leg joints provide a structural weak point
  • It lacks wheels on the stand legs

Skil 3410-02 Features And Benefits

The first thing you will notice on this job site table saw is the lightweight design. The table saw’s body is made from light components that include aluminum body and tabletop surface. Similar materials are used for the fence and miter gauge components. Its knobs and levers make use of high-density plastics as well.

These elements provide adequate stability and durability for extended use. The cube-shaped body measures 28.9 x 12.99 x 20.87 inches. This footprint provides plenty of room to cover the motor and gear systems while taking up less space than a cabinet table saw design will. All of these considerations make a great option for novice woodworkers as well as Do-It-Yourself homeowners looking for a simple table saw.

Stand

This product includes a table saw stand, something that you will not find with a benchtop model or some construction and job site table saws. The stand itself is made from steel tubing, allowing it to provide a rigid skeleton while keeping its weight down to a minimum. It may not include wheels with the base, but the lighter weight still allows the job site table to be moved rather easily.

A bend located near the middle of each leg allows the table to provide stability as weight is placed upon it so that the saw will not tip or lift as you place panels or wood sheets upon it. This design also allows the legs to taper to a thinner radius near the saw itself and will help to keep them out of the way as you work. It should be noted that the bottom of the legs do not stick out far enough to present an obstacle so you shouldn’t have problems with tripping over them.

A final consideration with the stand is the ability to break it down into a smaller size when the table is not in use. The legs come in two pieces and are connected with a screw system. This can make storage easier and will allow to keep it in a smaller space when it is not in use. Locking plates allow you to connect the job site table saw to the stand with little effort and they are designed to hold the saw securely.

Design

This product’s tabletop design is adjustable. It provides you with a 20 by 26-inch work surface in the standard position. That surface area should prove adequate when making a cross or rip cut on boards as well as smaller panels. If you need extra support while you cut, it can be extended to 20 by 36-inches for larger materials.

The adjustable wings on the table are designed to be moved smoothly and you should not need to strain when moving them. They do not appear to create less stability to the surface when extended fully, something that can become an issue with cheaper models on the market. Fully extended table tops remain flat and allow you to make cuts with the same blade angle as they do when collapsed.

A large power switch located on the front of the saw keeps it within reach and makes a large target to hit when quick shut-off is needed. The bevel lock lever is positioned next to the height adjustment wheel. A larger diameter on the adjustment wheel makes it easy to turn and will require less manipulation to make needed adjustments to the blade.

Power

Skil uses a motor design that provides power and durability. A 15 amp electric motor produces up to 2.41 HP with no load, a level of energy that will power through hardwoods and thicker pieces without bogging down. Another motor feature is the 5,000 no load RPMs it generates, allowing the teeth of saw blades to move easily through wood grain during cross or rip cuts.

Advanced motor features include soft-start circuitry. The purpose of these components is to allow the motor to go from off to running speed smoothly, helping to limit motor wear and tripped power circuits. Constant response circuits help maintain blade speed during cuts as well as protect against overloads.

Blade

This model includes a blade bevel scale along the front with permanent markings that should not wear with use. They are also easy to read, making adjustments easier to do. The arrow pointer is accurate and will give you proper readings as you set the blade.

A larger diameter on the adjustment wheel makes it easy to turn and will require less manipulation to make needed adjustments to the blade. You can adjust the blade height to 3.5-inches, which is ideal for cutting into x 4 planks of wood. It can be adjusted to make beveled cuts that range from 0 to 47-degrees. When combined with the angles on the miter gauge, users can make more versatile cuts along the corners and edges of their wood projects.

Skil 3410-02 also includes a table insert plate. This component is a standard piece that can be removed to manipulate the blades. With the Skil 3410-02, this piece is easy to remove but does stay in place once the blade is locked.

Safety

Safety features include a hole on the power button for a padlock. That can be used to help prevent an accidental switch-on by bumping the button. A riving knife is incorporated in the design to help prevent kickbacks as you cut. The blade guard is clear so that you can see the point of blade contact easily, and it also has a quick disconnect component for fast removal when it is not in use.

An added feature found on the Skil 3410-02 job site table saw is on-board storage for accessories. That includes storage for the rip fence, miter gauge, as well as blade and wrench holding. A cord wrap allows you to manage the power cord to keep the excess cord out of the way during operation and storage.

Accessories

A rip fence scale is positioned along the top lip of the front table side. Measurements up to 18-inches can be read from the upper portion while measurements beyond 18-inches can be viewed on the lower portion of the scale.

The rip fence is self-aligning, helping to keep the face in line with the blade as you make adjustments. This design element makes the table saw easier to use than older models that require extra alignment. A smooth surface allows the wood to rest against the fence and move smoothly as you feed material into the blade.

A miter gauge is included with the job site table saw and has an adjustable head that locks into position. That helps to keep the angle through the entire cut. Tracks on both sides of the blade allow you to position the gauge on either the left or right side of the 10-inch blade.

A large power switch located on the front of the saw keeps it within reach and makes a large target to hit when quick shut-off is needed. The bevel lock lever is positioned next to the height adjustment wheel.

What Buyers Are Saying

I’ve taken the time to look on multiple sites to discover what owners are saying in their Skil 3410-02 review entries.

Many online purchases made by owners are made due to the budget-friendly price point of this model. Multiple customer reviews state how impressed they are by the quality for the price.

Another consistent theme found across the internet is this model’s ease of use as well as its mobility.

Alternatives Worth Considering

DEWALT DWE7480XA

DEWALT 10-Inch Portable Table Saw with Stand (DWE7480XA)
  • EASY ADJUSTMENTS: DEWALT's Rack and Pinion telescoping fence rails make table saw fence adjustments fast, smooth and accurate
  • RIP CAPACITY: 24" of rip capacity, easily cuts a variety of larger shelving and trim materials
  • MODULAR GUARDING SYSTEM: Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application

OVERVIEW

A major feature found on DeWalt’s 10-inch table saw is the rack and pinion system used on the tabletop adjustments. This design feature provides extremely smooth adjustments when compared to other designs. That allows users to make very accurate fence adjustments without having to hassle with micro-adjusting the fence back and forth for long periods of time.

Another consideration to consider is the manufacturer’s support. DeWalt is known for its strong warranties as well as customer support. This includes a strong online presence on social media sites as well as their own page.

Bosch Power Tools 4100-10

Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table...
  • Powerful: 10 inch Work site band saw: Features 15 amp circular saw that delivers 4.0 max HP and 3,650 RPM for the power required for ripping, rip cutting, and cross cutting fine and rough carpentry...
  • Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
  • Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down

OVERVIEW

One thing that stands out with one look at the Bosch is the wheels on the table saw stand. Those wheels will make moving the job site saw easier than models without them. Bosch has also included handles on the stand that are positioned on the left side that makes pushing and pulling easier as well.

A 15 amp electric motor can generate up to four horsepower and 3,650 RPMs. This provides plenty of power to cut through the thicker stocks and harder woods without bogging down the blade as it moves.

Rockwell RK7241S

Rockwell RK7241S Table Saw with Laser
  • Heavy duty, yet versatile and light weight for the jobsite, work shop, or cabinet shop
  • Most cutting depth of any saw in its class
  • Folding fence for extra wide cuts. Maximum cutting depth at 90°: 3 9/16 inches, Maximum cutting depth at 45°: 2 9/16 inches

OVERVIEW

This product provides users with the deepest cut found on the 10-inch job site table saw models. A depth of 3 and 9/16-inches will allow you to cut through a 4 x 4 piece of timber with a single pass through the blade.

Another feature found on this model is the laser cut line indicator. Rockwell’s LaserGuide technology provides operators with a precise mark for more accurate blade positioning. This includes updating the positioning with beveled cuts on your projects.

The Final Cut

Table saws allow users to make a larger variety of cuts than circular or miter saws are capable of. Buying a job site table saw allows you to reduce the number of power tools you need as well as giving you the mobility a cabinet design can not.

The Skil 3410-02 Table Saw provides users with a budget-friendly job site table saw. A lower price point does not limit the adjustability of this product’s blade and fence, and it includes the accessories you will need to get started.

Like this article?

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

More Related posts

Leave a Comment

Your email address will not be published. Required fields are marked *

This website uses cookies to ensure you get the best experience.